The Truth About Ats 615 Thermostream Is About To Be Revealed.

Wewon Tech’s ats 615 thermostream is a precision-controlled temperature forcing system that delivers an airstream of as much as 20 SCFM to rapidly transform the temperature of a product or Device Under Test (DUT).

Wewon Tech supplies temperature transition speeds unequaled in the market, and also can maintain air cooling temperatures of– 80 ° C at 20 SCFM. It is made with the reliable as well as tried and tested Double Cool waterfall refrigeration system as well as does not require facility and also hard combined gases. The Wewon Tech’s supplies the smallest impact for a floor model jet stream ats 615 thermostream.

Secret Features as well as Benefits:
Temperature variety of +225 ° C to -80 ° C. Heat option of +350 ° C. Delivers 5 to 20 conventional cubic feet of air/minute.
Temperature shift from +200 ° C to -65 ° C in less than 15 seconds -80 ° C to +200 ° C in less than 15 seconds.
Reliable as well as robust Double Cool waterfall refrigeration system does not need hard mixed gases.
Small impact enables maximization of room usage.
External Tool Under Test thermocouple for controlling temperature accuracy at the device.
Configured without any holding arm or mechanical arm for simple jet stream positioning.
Dry air purge to aid protect test website.
Selection of shadows as well as boxes to satisfy your application.
Integrated in air dryer with oil, water as well as particle filters.
Enhanced BTU/watt removal capabilities given by greater air flow price.
Simple and easy modification temperature as well as air circulation set factors.

The Wewon’s Accuracy ats 615 thermostream is an air delivery tool based on a waterfall refrigeration system, and uses fast changes and also precise control in a range in between -75 ° C as well as +225 ° C, for circulations in between 1 as well as 6 SCFM. The adaptable delivery line permits very easy as well as accurate nozzle positioning. Accessory shadows and positioning stands supply added control of the ats 645-t thermostream.

The system can be configured to either control the air stream temperature straight, or the device under test (DUT) temperature through a cascade control loop. The personalized Watlow? ATS Series Ramping Controller capability consists of auto-tuning, ramp/soak programming and also remote operation.

ats 615 thermostream

Available communications are serial, GPIB, or the WatVue? The ats-710 has an indispensable pressure regulator and also flow control shutoff. It can be operated on either a completely dry (< -70 ° C dew point) air/ nitrogen supply, or on residence (compressed) air with the use of the accessory air dryer. The system is shielded from excessive nozzle ats 830-m thermostream trips by a combination of independent over-temperature and also low-flow eliminated circuits.

The Wewon’s ats 615 thermostream has a temperature range of -70 ° C to 225 ° C and runs from basic 120-V service. It includes CFC and also HCFC free-dual phase ieee-488, rs485 as well as refrigeration remote interface, and an exterior thermocouple for temperature control as well as surveillance. It uses temperature shift rates of +125 to -55 ° C in 20 sec. The system has and also utilizes off-the-shelf refrigerants 40 programmable temperature accounts at 0.1 ° C increments.

It is made with the reliable and tried and tested Twin Trendy cascade refrigeration system and does not require complex and difficult blended gases. The Wewon Tech’s provides the smallest footprint for a flooring design air stream ats 615 thermostream.

The system can be set up to either control the air stream temperature directly, or the gadget under test (DUT) temperature by ways of a cascade control loop. The system is safeguarded from excessive nozzle temperature expeditions by a combination of independent over-temperature and also low-flow reduced out circuits.

It includes CFC and also HCFC free-dual phase ieee-488, refrigeration and rs485 remote interface, and also an external thermocouple for temperature control and also monitoring.